OK, if your reading this you’re probably having a problem and we want to help you. If you’re driving a rental car and you’ve just realized that you have a lost rental car key and you’ve felt that ugly “Oh No!” sensation in your chest, relax as much as you can and take a deep breath.
There are a few ways for you to get the help that you need. After taking a deep breath the second thing that you want to do is contact your car rental company and let them know that you’ve lost your car keys. They may have an extra key or key fob on hand in their office that they can get to you. If they don’t, some rental companies actually have contract relationships with a 24 hour locksmith and they may be able to send that automotive locksmith to you. Hopefully it will be a local locksmith and they’ll be able to reach you quickly.
If your rental company does not have a contract car locksmith then things have become a little more complicated, but you should still be able to solve matters. Before you move on to taking steps without your car rental company check and see if they have a “Key Code” code on file for your rental car before “ringing off” with them.
Now would be the time to get in touch with your own private car insurance provider and check and see if they have a “road side”-type program that can help you. If they do they’ll want that “Key Code” info. If you have lost your rental car keys or the rental key fob and find that you cannot expect help from your rental car company or your own insurance company you’re going to have to become more proactive.
Don’t worry, we’ll walk you through this. Essentially there are two types of automotive locksmiths. The car dealership for the make of your rental car is generally a full service car locksmith BUT they typically aren’t a 24 hour locksmith and can’t come to you. So, they usually can’t help in your situation. Now you need to find that 24 hour automotive locksmith on your own.
When you speak to prospective locksmiths make sure that they understand that, since you’ve lost the car keys or key fob that you will require a key replacement. Of course you’ll want the lowest car key replacement cost possible, but keep in mind that a cheap locksmith isn’t always the best locksmith. Check out their reviews and see if they have BBB ratings or other pertinent comparatives.
Locked Keys in Car
If you’ve got a locked car door and the rental car keys are inside your situation is better than if you have lost the rental keys entirely. In these cases, if the car keys or key fob are locked in the car trunk your mobile locksmith will be able to get the car opened for you quickly with some basic car locksmith tools. This may, and probably will, set off the rental car alarm but once your locksmith has their hands on the car keys or the key fob they’ll be able to get the alarm shut down and you’ll be on your way. The car keys or the key fob locked in the “Cab” of your rental car is the least serious and easiest to address problem of the three problems that we are presenting here.
Locked Keys in Trunk
Security technology is going to be working against you if you have the car keys or key fob locked in the trunk. In this case you will certainly require car key replacement. Few if any recent car models have a lock channel installed in the trunk, rather, the trunk can only be opened with the button in the interior of the car and then, in many cases, only when the ignition switch is in the “On” position. Your locksmith is just going to have to make you a car key duplicate. Alright, so now you’re looking for a locksmith that can get you out of this mess and this is the time to be conscious of what it is you’re going to need. You do want to find cheap car key replacement but it’s so important that you find someone who is professional and responsive to get your car keys made. So, let’s return to a few salient points; you want a proven 24/7 mobile locksmith, you want to check their credentials and it’s best IF THEY make it easy for you to do so. Be sure that you have the KEY CODE details for them. And make sure that the locksmith service you contact understands your situation and pledges to you that they are qualified to come to your location and provide you key replacement for the make and model that you have rented.
A good tip here is to ask the dispatcher that you speak with or “Live Chat” with whether or not they are a salaried employee of the locksmith company. If they aren’t, think about contacting another company. A locksmith company using a contracted answering service for dispatch indicates, to us at least, a lack of dedication and certainly implies that their response time will be slower than a locksmith using their own people for dealing with customers in these situations.
The lowly car key has changed quite a lot in the last 20 years as has the nature of car key replacement and car key replacement cost. In fact, many “keys” are now “Hi-Tech” devices that drivers from 30 years ago wouldn’t even recognize. And many of today’s drivers probably aren’t even aware that there was a time when a car key was a simple, metal mechanical device very similar in use to the old, homely door keys on buildings. Even if you prefer the “Old Fashioned Way” or are perhaps a little “tech-resistant” you should recognize that the evolution of the car key is a good thing for all of us because it is based by and large on making us safer and our cars more secure. Toyota has always been a tech leader and one of their most popular models is the RAV4, so, you RAV4 owners/drivers may consider this an article just for you. Did you know that the RAV4 was introduced in Japan and Europe in 1994 as the first “Crossover SUV” and that it wasn’t called the RAV4 until it reached the American market and was renamed from the Ravufo to the RAV4 which stands for “Recreational Activity Vehicle 4 Wheel Drive”? Now you have a little piece of trivia about your car to tuck away and use at the appropriate time!
TR47 Toyota Key
As an enhanced security feature for the RAV Toyota went to the “key fob” (Toyota RAV4 Key Fob Part#: TOY-214) in 2006. The “fob” is the synthetic, non-metal part of the key that houses the “remote control” unit for door locks and in more recent models the remote control for starting and stopping the engine. It may be separate from the mechanical key or incorporated into the key head as a one piece device. You will find this type of key on many of the RAV models from 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 even though Toyota introduced the latest “key” iteration, the Toyota Proximity Key or “Toyota Prox Key” in 2009.
Toyota key fob
Replacement Toyota Key – Transponder TOY44D-PT
You may think of the Toyota Prox Key as a “Keyless” apparatus because it really basically is. There is no “key blade” that inserts into your steering column or dashboard but, rather, it is a small device that fits in the palm of your hand and is held near the car ignition and the fob “talks to” the onboard computer in the car. When you press “Start”, the fob tells the car that it’s time to start and run. All very safe and very convenient unless you lose or seriously damage your Prox Key or key fob with an actual key blade in it. If that happens you’re going to need car key replacement, preferably cheap car key replacement.
Toyota Key Replacement
If you find yourself in the position where you need lost car key replacement or damaged car key replacement for your RAV you’re going to first decide where and by whom you want to have your car keys made. In the case of a lost or damaged “chipped” key for your RAV4 where you have no spare key to program a new key from you can follow one of two courses, going to or getting the car to a Toyota dealership or employing the services of a Mobile Locksmith. You’ll want to go about this in the least expensive way possible so we strongly urge you to take some time to sort out the cost to replace car key. Toyota car key replacement isn’t inexpensive so you need to shop around a little unless you’re faced with an absolute emergency need for key replacement. But here’s a general idea. A Mobile Locksmith will charge in the neighborhood of $30.00-$50.00 for the service call and from $100.00-$200.00 to make the key, so you’re looking at a total of about $130.00-$250.00. A dealership will charge from $150.00- $500.00 for the complete service. But as you are making up your mind, keep in your mind that if you don’t have keys to start and drive the car to the dealership and must have the car towed that’s another substantial expense. Remember that while you might have to get your car to the dealer, a Mobile Locksmith will come to you. And if you have chosen a truly a full service locksmith they will have everything in their mobile units to perform your lost car key replacement, program your replacement car keys if that is required and replace car key by vin number if that must be one of your considerations (your locksmith should be able to advise you on exactly what you need).
Where Can you find Toyota Rav4 key code?
If you have a RAV4 with an actual key with a key blade that inserts into the ignition in the steering column and have lost or destroyed your key there may be a way for you to avoid calling out a mobile locksmith and/or getting the RAV in to a dealership and we want in all fairness to give you a little info on that. You are probably aware that the traditional blade-type key is “Cut” into a key blank using a specific “Key Code” to a specific car. And that key code is available to you. Since 1996 Toyota has stamped their car’s key codes on the door locks. In our experience the code is usually on the passenger door lock, so try looking there first. If you don’t find it on the passenger door lock check the driver’s side. It should be there. Now, we want you to understand that this key code will not be useful for key programming and it will allow a key blade to be cut.
Toyota RAV4 Immobilizer Key Code Reset
The engine immobilizer system is an anti-theft device that became standard equipment on the Rav4 in 2009. The immobilizer system is designed to virtually “immobilize” the engine if the technological link between the key and the car computer has been compromised. When you insert the key into the ignition and the transponder chip signals the car that it’s OK to go ahead and start the engine will only start if the key’s code is the same as the code in the onboard computer. If something has happened to disrupt the “conversation” between the key and the computer the car will not start and the immobilizer system will have to be reset before it will start gain. No doubt you are curious as to whether or not you can reset the immobilizer yourself and, unfortunately, the short answer is “No”. To reset the immobilizer you will need the help of a professional, either a qualified locksmith or the actual dealership.
But remember that a qualified mobile locksmith will come to your location while a dealership most likely will not.
Mile High Locksmith® is a full service locksmith company that has been in existence for many years. And one of our areas of expertise is automotive locksmithing. Honesty as well as a commitment to being genuinely helpful in as many ways as possible is a hallmark of the locksmith industry and we take this opportunity to be helpful to owners of the Chevy Malibu. The first Chevy Malibu appeared in 1964 and is still in production today. As most Malibu owners already know, there have been A LOT of changes to the car in those 54 years! Of course, some of the many changes in the Malibu have been in the car’s ignition, key/key fob and security systems. We will address those systems in this article and offer you guidance on how to have Chevy Malibu key made.
1964 to 1978 Chevy Malibu simple metal key
In earlier days the key for the Malibu was a simple metal, mechanical key but with the introduction of the transponder key and the Chevy Malibu key fob the key/ignition system has become considerably more complex and it behooves the Malibu owner to be familiar with this. For this purpose we will assume that we are not talking about the “Collector” Malibu’s from the pre-1978 period. So the following will be a detail of types of Malibu keys from 1978 onward and we will walk you through the steps for Malibu key replacement, how to program Chevy key with original key and how to program Chevy key without original key. Please note the “programming” will get a little elaborate and we want to make sure that you understand the process.
Chevy Malibu Key Replacement by the year
For Malibu’s built in 1978, 1979, 1980,1981, 1982,1983,1984, 1997, 1998, 1999,2000,2001, 2002, 2003, 2004 and 2005 the key will be a straightforward mechanical key. These keys have no electronic component and require no programming. These will be the simplest and least expensive keys for the owners to manage and, when necessary, to replace.
For Malibu’s built in 2006, 2007,2008,2009,2010,2011,2012, and 2013 there will still be a mechanical key but these keys will have an electronic “Chip” built into them that will dictate that a specific key must communicate only with a specific car. This type of key is referred to as a“transponder key” and it is a nice anti-theft feature but the key must be programmed to the car or else the car will not start. Don’t worry, we’ll take you through that process (see below) and make it clear for you whether your skills will allow you to perform the work or if it will be better for you to consult a professional.
For Malibu’s built in 2014, 2015, 2016, 2017, and 2018 you are most likely to have a key fob. You might think of the key fob system as a “keyless ignition”. The programming of these key fobs is generally a process best left to the professionals either at a GM dealershipor a professionallocksmith.
Chevy Malibu Key replacement, Key blank reference number
The following is a very valuable reference tool for Malibu owners: to insure that you have the correct mechanical key, transponder key or key fob you will need this information. You probably know that in the case of a mechanical key an appropriate “key blank” is required to produce, or “cut” the key that you need. Similarly, an appropriate “blank” is required for the transponder keys and even for the fob, though for the fob it’s not actually a mechanical blank but it’s still called a “fob”. Below are you “Key Blank” reference numbers (KBR#).
1978-KBR#: Ignition GM J, Door GM K
1979-KBR#: Ignition GM A, Door GM B
1980-KBR#: Ignition GM C, Door GM D
1981-KBR#: Ignition GM E, Door GM H
1982-KBR#: Ignition GM J, Door GM K
1983 & 1984- KBR#: Ignition GM A, Door GM B
1997 to 2005- KBR#: B91-P (blank creates key for both ignition & door)
2006 to 2013- KBR# B111-PT (transponder, chip key for both ignition & door)
2014 to 2018- KBR: Flip Key Fob
How can I make a new key for Chevy Malibu?
There are two principal was ways to get replacement Chevy Malibu keys made and that key replacement depends on the year that your Malibu was built.
You can contact your local GM dealership and ask them to make the replacement for you. But keep in mind that you’ll have to have your car towed to the dealership and you’ll have to provide the dealership with proof of ownership (likely the title) and a picture i.d.
Or you can contact a reputable local mobile locksmith and have them come to your vehicle and make you a new key right on the spot where you and your vehicle are.
Chevy Malibu key replacement cost
Of course, these replacements can be costly. Let’s just make some general comparisons in that regard. To get a mechanical key made at the dealership the dealer will usually charge about $20.00 whereas the mobile locksmith will charge about $100.00 because he must charge you the mobile fee. But consider that you will have to have your Malibu towed to the dealership and the typical charge for a 5-7 mile tow is $30.00 to $100.00 and the compared expenses between a mobile locksmith and a dealership start to flatten out pretty quickly. Conversely, for the transponder key the mobile locksmith will usually charge about $150.00 where the dealer will charge about $300.00 and then there is still the cost of the tow added to that. And again, for a key fob the locksmith will charge about $180.00 to $300.00 while the dealer will charge about $400.00 to $500.00 and there’s still the added cost of the tow on top of that. So keep all of this in mind when to take your decision on which way to go.
But there is sometimes another option- saving some money by doing the work yourself!
There are two ways to save some money on your Chevy Malibu key replacement cost by going DIY.
Finding your key code yourself and having your key made by a professional locksmith (the better choice) or at a key making kiosk in a hardware store or mall.
Programming your Malibu transponder key yourself.
Chevy Malibu key code location
To start saving money on your Chevrolet Malibu key replacement cost, dealer replacement fees, vehicle tows and even locksmiths you must first find the key code for your Malibu that will give you the correct key cut.
For the 1978 to 2002 Malibu’s the key code will be stamped on the ignition switch. Once you have that code you will be able to contact a key maker or locksmith (your better choice) and have him cut you a new key by using that code. He will need the year of your Malibu to do this and you will have saved money by not summoning the mobile locksmith.
For the 2003 to 2005 Malibu there is about a 50/50 chance that you will find the key code on the ignition switch. If you don’t find it there you’re going to have to call in an expert.
For 2006 to 2018 Malibu’s your essentially out of luck because there is no key code information anywhere on the vehicle at all. For those Malibu’s the dealership or locksmith will have to use your car’s VIN number to generate the key fob and that’s going to be more costly.
Program Chevy Malibu key
Can you program a Chevy Malibu key yourself? The short answer is “Yes” if you are dealing with one of the transponder keys. The following is only applicable to transponder keys and you need to know what you’re doing so let us help you out there. It’s fairly easy to program a transponder key to the Malibu as a master key you’ve lost both your main key and your spare and it’s easier still to copy a key program if you do have a working key.
In the event that you have no keys at all to the Malibu you’ll have to program a new master key, which will erase the old keys so if you find the lost keys please understand that they won’t work after you program the new “master”. Before you initiate the process of programming the new master key make sure that your car battery is 100% charged and then follow the steps below. Remember, the following procedures apply ONLY to the transponder key systems.
For a new master key:
Once you have found your key code number and have had a new transponder key cut insert that key into your ignition and place the key in the “On” position BUT DO NOT START THE CAR. You are in the process of programming the key, not running the Malibu. Using a timer or watch leave the key in the “On” position for 10 minutes. Keep an eye on the “Theft Warning Light” on the dashboard as it will be on during these 10 minutes.
When the theft light goes out turn the ignition off. Now turn it back on (the theft light will come back on) and repeat the 10 minute “Key In The “On” Position” procedure. When the theft light goes out, once again, turn the ignition off.
Then, one more time, repeat the steps above so that a total of 30 minutes have passed in the programming procedure. When the theft light turns off the third time your new master key should be programmed.
Copy a new key copy from an existing key:
Insert a PROGRAMMED key into the ignition and turn the ignition to the “on” position without actually starting the car.
Count slowly to 10 or 15.
Turn the ignition to the “off” position and withdraw the programmed key.
Insert a new, correctly coded key that you want programmed to the car and turn the ignition to the “on” position without starting the car. The theft light on the dashboard will light up.
Wait at least 5 seconds and the theft light should go off. When it does turn the ignition to the “off” position. The new key should be programmed to your Malibu at this time.
We at Mile High Locksmith® hope that this article has been practical for you and has provided you with useful information. One thing that we would recommend to the reader after all that has been said here is that, as you are trouble shooting your own key and ignition problems, if you reach the point where you sense that you have gotten beyond your level of competence be sure and get in touch with a professional at the dealership or at a mobile locksmith. That’s the wise way to handle this trouble shooting on your own.
Watch for future articles on automotive key and ignition systems from Mile high Locksmith®. And we hope that you keep yourself and your family safe and your belongings secure.
Honesty and fair play are the hallmarks of the Locksmith profession. Adhering to those hallmarks is very important to us and we believe that disseminating accurate and useful information to consumers is one of the best things that we can do for both the consumers and for our profession. We are Mile High Locksmith and we have been in business since 2002 and maintain a prestigious A+ rating from the BBB and we want to make it a point in this article to give the Acura owner the very best in general and applicable key and key fob information that we can.
The first thing that we wish to alert you to is that Acura keys and key fobs are somewhat more complex to manage than most keys and fobs. We highly recommend that if you lose a key or key fob or have one wear out on you that you consult either an Acura Dealership or a fully mobile Acura locksmith service. Acura owners should be aware that there is a great deal of specialization that comes with the Acura key and the Acura key fob. Please allow us to take some time to make sure that you, as an Acura owner, have a complete understanding of the keys and fobs, the Acura key fob battery which we always have in stock, how to program Acura key fob and the typical Acura key replacement cost.
Acura Key Fob Replacement Cost
Acura Key Fob FCC IDKR5V1X
The Acura owners first cost consideration is whether or not to get your replacement Acura Key at Dealership. The Acura key/fob cannot be “programmed” without the car present. So if you use a Dealership it will usually entail having to have the car towed to that Dealership, which is an added cost, and in many cases having to wait for an appointment to open up in the Dealers maintenance work schedule. By the time you pay for a tow and the service at the Dealer it is not uncommon for your bill to be around $300.00. Add to that the possibility that it might take a couple of days to get the service performed and you’re looking at expenses in money and time. And as the old saying goes- “Time Is Money”.
On the other hand, when you choose a fully mobile professional locksmith they come to you. A 24/7/365 mobile locksmith, and most professional locksmiths that supply car key, ignition and fob services are 24/7/365, brings all of the tools and assets with them in their service vehicles that the Dealerships have which can allow you to avoid the tow and perhaps having to wait on line for the service to be scheduled. The right mobile locksmith can usually be with you within an hour of your call and have the situation with your key or fob rectified in under an hour. And in the end the mobile locksmith typically charges you around half of what the Dealer would.
Acura Key Fob Programming
At this point you may be asking yourself whether or not you can avoid all of the time and expense by just running down to the local hardware store (or a cheap and unprofessional key seller) and having them stamp you out a key or sell you a fob over the counter. The short answer is “No”. Acura is a car maker with a very deep dedication to anti-theft technology and only a professional can make you a key or fob because Acura requires the technician to use key programmer tool “onboard programming” to make their keys and fobs work. Now, from 1997 to 2018 the Acura key code location has been stamped on every lock on the Acura vehicle and a non-professional locksmith can cut a mechanical key for the car without having an original key to format the newer key from. BUT the non-professional still cannot program the new key. This is because since 1997 Acura has produced and supplied Transponder key, or another name for it “Chip key keys and fob devices and in the newer models “Smart Proximity” keys and key fobs for all of their models. What “Smart Proximity” means is that there is a “Chip” or “Transponder” in each key and Fob that “Talks” to the car. In other words, the car and the key/fob recognize each other and if they don’t recognize each other the car won’t start. Originally the “Chip” was in the mechanical key itself or in the plastic fob on the top of the key. This, for example, was true of the MDX model for 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 AND 2014. But the transponder program has evolved over the years from being installed in the physical key, to being installed in the vehicle security door opener fob, to being installed in a fob built onto the key and as of 2014 in some models there is no longer a mechanical key to the car or a key channel in the steering column at all! Some models do still have the mechanical key, these being the lower end units (TL, TSX), but the up end models (RDX, MDX) have the keyless fobs for 2013, 2014, 2015, 2016, 2017 and 2018. Now, that said, there are sometimes options in your choice of a key. For instance, in the 2012 MDX you can choose to have a key without the remote door opener installed in it and this will be a less expensive key. But you can also have a key with the remote opener inside the fob that is part of the key and that will be a more expensive option. And then there are models and model years, like the 2013 and 2014 ILX, where you just don’t have any choices offered by Acura and you have to install the key or device that they require. In all of these cases we counsel you to shop around both in terms of the dealerships and the available professional locksmith companies to insure that you are getting the best advice and the best possible price for the service and for overall expense. So be certain to factor all of this into your decision making process when it comes to both dealerships and mobile locksmiths.
You can see that the Acura key/fob system is fairly complex and is clearly something that needs to be done right. So, please be advised that Locksmith companies will offer you mobile locksmith units responding to Acura key/fob calls that are fully equipped with everything that is required to solve your problem. The Locksmiths programming device attaches directly to the car’s ignition system which tells the locksmith how to cut the key when one is required or exactly what steps are necessary to program the key or fob to the car. When the key is programmed to the car the key is then “registered” in the Acura database which is another security feature. For the mechanical keys which have to be cut locksmiths strive to use only Acura produced key blanks. There are however times and circumstances where they have to substitute a non-Acura made product but these are rare and only occur when the circumstances dictate that they get the key made or fob programmed immediately.
Finally, let us politely point out that there are also circumstances that are not uncommon when an Acura owner may have neither lost nor damaged his/her key or fob but it would still be best to have another key or fob produced for their vehicle. We strongly recommend that every vehicle owner have two keys or fobs for each vehicle owned. In that case if a starter device is lost or damaged you have the second one as a back up and you are not trapped without your car. Makes sense, doesn’t it? Locksmiths are happy to come to you and get the second starting device created for you in case you only have one. And remember, Most locksmiths will have a mobile service 24/7 and so come to you at your convenience while the car is sitting in your driveway or some other safe location, do the work and hand you the key.
So, for key and key fob services for your Acura, decide which is the best option for you- the dealership or the mobile locksmith- and if you do decide to employ the locksmith find the best one in your locality (we suggest that you look for that A+ BBB rating) and you’ll have a quality locksmith on your site to get you rolling in your Acura again in the least amount of time and for the least amount of money possible.
Did you lose the key for your Subaru Outback? Who can make you a key without the original? Where can you find the best price and what should you watch for when you order a new key replacement for your Subaru Outback? Here are some tips:
The cost for a new Subaru key and where you can make a new key for your Subaru will be determined by the year of your Subaru Outback. These keys are very different between the years. Below, we will break down what type of key your Subaru Outback requires by the year.
Subaru Outback key fob replacement
What is the difference between a Subaru Outback key fob and a fob that is separate?
A key fob is a key that is one unit and has the push buttons on it. This is different from a fob where the key and push buttons are separate. (See picture above). The key fob is plastic and has push buttons to lock and unlock the doors, open the trunk and has a red panic button. Subaru started to make key fobs for the Subaru Outback starting in the year 2008 and continues into 2017 models.
What if the fob is separate from the key?
If your Subaru fob is separate from the key and has the buttons to lock and unlock the doors and a button to open the trunk but no red panic button then you have just an old fashioned fob. This fob has a different electronic chip and different programing procedures from the key fob that you will find with newer models of Subaru Outbacks.
Subaru made these types of fobs that are separate from the keys in the years 2005, 2006 and 2007.
Where can I find the key code on my Subaru Outback?
How to save money by doing some of the work yourself
You cannot find any key codes on Subaru Outback locks or ignition locks. If you lose your key and are wanting to save some money by doing some of the work yourself, you can remove the driver side or passenger side door lock or the ignition lock and take it to a locksmith shop. You can then ask them to make you a key from the lock itself. This key will work on the rest of the locks as well.
Subaru Outbacks from the years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 share the exact same key between the driver side door lock, passenger side door lock and the ignition lock.
These keys are just regular keys without a transponder chip key feature or anti-theft system and no programming is needed.
In these years you can have a locksmith make you a key from the lock and you are done. The key will start the engine as well.
Before you remove the lock and take it to a locksmith shop, confirm that your older key was the same key that worked on both the door lock and ignition lock. It is possible that over the years one of the locks has been changed and these keys do not match anymore. If one of the locks has been changed it will be impossible to match the key between these locks without removing all of them.
From the year 2005 your key will need to be programed by a professional and your car will need to be present. We recommend you hire a professional to make you a new key replacement for your car.
Subaru Outback key replacement cost
If you lose the key for your Subaru Outback, there are two places that can make you a new key. The first place will be a Subaru dealership and the second place will be a locksmith company. It is always a good idea to call your neighborhood Subaru dealership and ask them what the cost will be to get a new key replacement. Especially for a Subaru Outback from the year 2004 and older. In these older years, you can just pick up the key from the dealership without bringing in your car. The dealership will ask you to bring proof of ownership.
The second place you can get a new Subaru Outback key made will be with an automotive locksmith company. A locksmith company will be a more convenient way to have a new key replacement made, especially if your Subaru Outback was made in the year 2005 or after. The reason is because the locksmith will have mobile locksmith services and will be able to bring the programing machine to your car’s location and make you a working key right on spot.
How much will it cost?
Prices between a Subaru dealership and a locksmith company can be different. The locksmith will add a service call fee when the dealership will ask you to bring the car in which will add towing fees.
If you have full coverage insurance, we recommend you call your insurance company and find out if you have roadside assistance for locksmith services or towing.
Since the prices for service are different between different locksmith companies and even between different Subaru dealerships, we recommend you call a few Subaru dealers and a few locksmith companies and shop around for the best price.
Subaru Outback key differences
From the year 1989 to 2004, your Subaru Outback has just a regular key without any features. No programing is needed. The key part number is X251.
Subaru Outbacks in the years 2005, 2006, 2007, 2008 and 2009 have a transponder key. This key needs to be programed to your car in order to start it. The key part number is SUB4-PT.
Subaru Outbacks in the years 2010, 2011, 2012, 2013 and 2014 have a high security transponder key. This key needs to be programed. The key part number is DAT17T13.
Subaru Outbacks in the years 2015, 2016 and 2017 have a key fob.
Information: If you have lost your Subaru Outback key and your Subaru was made in the years 2015, 2016 or 2017, we strongly urge you to verify your OEM part number using the VIN number with a Subaru dealership before any work is done. If you are using a locksmith company, make sure that the locksmith can match the part number you received from the dealership before he tries to program a new key. Making a new key replacement for your Subaru Outback without first verifying the OEM part number with the dealership for these years can cause damage to your car’s computer.
Did you lose the key for your Subaru Impreza? Who can make you a new key replacement and what should you watch for when you use a locksmith service? Here are some tips and information about making a new key replacement for your Subaru Impreza when you have no key to copy from.
Important: If you are using a locksmith service to make you a new key replacement for your Subaru Impreza from the years 2012 until 2017, we strongly urge you to verify the OEM part number by using your car’s VIN number with the Subaru dealership. You can then provide it to the locksmith to make sure the locksmith’s key part number matches the key key part number you received from the dealer before the locksmith does any work on your car. The reason is if the locksmith tries to program a different key without verifying the OEM part number, it can cause damage to your car’s computer.
Information: From the year 2012 until the year 2017, most likely your Subaru Impreza has a new keyway. In other words, even if your key looks exactly the same as the key for the 2011 Subaru Impreza, most likely the key for the year 2011 and earlier years will not fit the key holes for a Subaru Impreza from the years 2012 to 2017.
Are all the models of Subaru Impreza difficult to make a new key replacement for?
The answer is no. In fact, most Subaru keys are very easy to replace even when you lost the only key you had.
What is the difference between a Subaru dealership and an automotive locksmith service?
The difference between a Subaru dealership and an automotive locksmith is the cost and the service. Who will cost less and who will provide you with more comfortable service will depend on your Subaru Impreza’s year. The reason is that over the years Subaru Impreza keys have changed as well as the cost. If your Subaru is older, most likely the Subaru dealership will be cheaper. If your Subaru impreza is a newer model then most likely the automotive locksmith will be a better deal. Here are some examples:
If your Subaru Impreza was made in the years 2002, 2003 or 2004, your key has no extra features and the key is just a regular key. The part number is X251. No programming is needed. The owner of the car can take the title and their ID to the closet Subaru dealership and have them make a new key replacement using the car’s VIN number.
From the year 2005 and up, your key will have a transponder chip inside the keyhead. This chip is invisible to you and will need to be programed to your car in order to be able to start it. A locksmith will be able to bring the programing machine to your car’s location and the dealership will ask you to tow the car in.
If your Subaru Impreza was made in the years 2005, 2006 or 2007, then you have a transponder chip key with part number SUB4-PT. This key requires programming by a professional.
If your Subaru Impreza was made in the years 2008, 2009 or 2010, then you have a high security transponder chip key with part number DAT17T13 that needs to be programmed by a professional.
If your Subaru Impreza was made in the years 2011, 2012, 2013, 2014, 2015, 2016 or 2017, then you have a high security transponder chip key with part number DAT17T13 or SR12-PHT. In the later years It is possible you may have a different type of key. The best way to verify which key your car requires is to call your local Subaru dealership and ask them what your key’s part number is using your VIN number and then you can provided it to the professional who makes you the key.
Did you lose your car key and have no spare? Did you get locked out of your car, house or business? Did you receive the new keys for your new home and need to change the locks? This is where Mile High Locksmith can help. With years of experience our company carries a full line of car keys, door locks, house keys and many other locksmith products to provide you with the best resources for any lock and key service you may need. With our convenient locksmith retail shop in Littleton, CO or our mobile Littleton locksmith services, you can have your keys copied or you can buy a new front door lock directly from us.
How is the Mile High Locksmith shop different from other locksmith companies that provide only mobile locksmith service?
The answer to this question is our locksmith retail shop
Mile High Locksmith store and mobile service:
In our retail locksmith shop we have our own security specialist technicians and a wide selection of locks and keys that you cannot find in the hardware stores.
We have everyday low prices. We always commitment to providing you with our lowest prices.
With Mile High Locksmith you can choose between aftermarket products as well as factory products.
Being the Littleton lock shop and supplier, we provide you with a warranty on the locks you purchase as well the labor. When you buy locks from one place and hire a different mobile locksmith to install them, you can find yourself with warranty issues. If the key or the lock stops working the locksmith may blame the lock factory and the lock factory may blame the mobile locksmith for his work. With Mile High Locksmith you will receive a full warranty for any parts and labor. That way you only make one phone call for any lock or key problems.
Our trained locksmiths have full access to the shop and will be able to supply locks and keys at your location.
Littleton Colorado locksmith training program
Mile High Locksmith has training programs. We train our locksmith technicians to become expert locksmiths and specialize in the following areas:
Business and commercial buildings
Home door locks
Lost car key replacements
Emergency lockout services
Vehicle jump start services
Mile High Locksmith Partners
Car insurance key coverage
Many car insurance companies are partners with Mile High Locksmith and provide partial vehicle key replacement coverage for your convenience. When you lose your car key, call your insurance company and asked them if you are covered for a replacement car key. If you are, Mile High Locksmith will split the cost between you and your insurance company separately. That way you will end up paying much less for our service.
Mile High Locksmith DBA Mile HIgh City Locksmith Service in Littleton, CO. Trademark policy
First, if you are searching online for automotive locksmith services to get a key made for your Mazda CX-5 we would say you should expect some locksmith companies to answer you with, “we cannot make this key,” or “only the dealership can make this key,” or “your key is very expensive”. Mazda CX-5 from the years 2013, 2014, 2015, 2016 and 2017 can have a smart key fob system installed. If your Mazda uses a smart system key fob it means that your key is a key fob with no need to turn the traditional ignition switch in order to start your car and your car actually has a push button to start it.
However, some of these vehicles may not use a smart system key fob. If your vehicle was made in the years 2013 or 2014, your vehicle may require just a regular key. This regular key costs much less from the smart key and is more easy to make. This also means any automotive locksmith company will be able to assist you.
Mazda CX-5 key type
Regular transponder chip key
If your Mazda CX-5 has just a regular key, this key is still considered a transponder chip key because it has a chip inside. This electronic chip is invisible to you and is located inside the plastic key head. The chip belongs to a system called the anti-theft system. This type of key needs to be programmed to your vehicle. If you have a key made to your car and the key is not programed as well, even if the key will turn the ignition switch cylinder, the car will still not start.
Many mobile locksmith companies will have the right equipment to program these transponder chip keys.
With the Mazda CX-5 smart key fob you can say everything is much more difficult to do than with just the regular key. You will have to use a professional locksmith company that carries all the right equipment or you will need to take your Mazda into a dealership in order to program your smart key fob. If you do use a locksmith company, we recommend you make sure they have the original equipment that is made in the USA in order to program your key fob and not aftermarket cheap equipment that can damage your vehicle’s ECU. Besides the original equipment, the locksmith will need to follow the right programing instructions that are different from the standard instructions. Make sure the locksmith has this knowledge.
DIY: GM vehicles that required VAT keys and how you can save some money by doing the work yourself.
From the year 1990 up to the year 2005 some GM vehicles require a VAT key in order to start them. Here is a list of GM vehicles that require VAT keys and some information on how you can save some money by doing the work yourself.
It can cost significantly less to rekey your car door lock rather than rekeying your vehicle’s ignition. It’s a good idea to ask a professional to make you a new key for your car using the car’s door lock in order to save money. You can save even more money by removing your car’s door lock and taking it to a locksmith shop and having them make a key for you there.
Lost car key replacement It can cost significantly less to rekey your car door lock rather than rekeying your vehicle’s ignition. It’s a good idea to ask a professional to make you a new key for your car using the car’s door lock in order to save money. You can save even more money by removing your car’s door lock and taking it to a locksmith shop and having them make a key for you there.
You can find many vehicles that share the same key for the door lock and the ignition switch lock. In fact, many mobile locksmith companies will use the door lock as a reference in order to make the ignition key for your car.
There are many tools today that professional locksmiths use to read the car’s door lock code. The most common tool locksmiths use today is called a Lishi tool.
Many mobile locksmiths will come to your vehicle’s location and read the key information from your car door lock using the Lishi tool without removing the lock from the car door. Some locksmiths will prefer to remove your car’s door lock and read the key information that way. Either way they will use your car’s door lock to make the new ignition key.
We recommend you consider using a locksmith service
We recommend you consider using a locksmith service when making a key for your car.
Using a professional locksmith company will cost about $100 to $200. Using a locksmith company will be the most convenient way to go.
Car rekey service
You can save money by doing some of the work yourself. You can remove the car door lock and bring it into a locksmith shop.
Before you try making an ignition key for your car by using one of your car’s door locks, you will need to confirm that your previous older key was working on both the door lock as well as the ignition lock. If not, it will be impossible to make an ignition key by using the car’s door lock as a reference.
Check if you have a chip key
Check to see if your ignition switch has an anti theft system installed, (also known as a transponder chip key system), by the manufacturer. If your ignition switch does have an anti-theft system, making a key to start your car will require a professional locksmith to come to your vehicle’s location in order to connect a diagnostic key programming machine to your vehicle’s ECU, (your car’s computer), in order to register the new key to your car. You cannot program a key to your car without your car being present.
We recommend you always make a phone call to your local dealership and ask them if they have the key information on file. In many cases it can save you money and time if they do.
Another good thing about the dealership is that you can provide them with your car’s VIN number and get information about what type of key your car requires.
Here is how you can save some money when you lost the only key to your car:
Find a local locksmith shop in your area and give them a call. Ask them if they can make you an ignition key if you bring in the car’s door lock. Make sure to provide them with your car’s make, model and year for confirmation.
Find the most easy door lock on your car to disassemble. We recommend that you do not use the trunk lock or the glove box lock. Remove the door lock from your door.
You can find instructions on how to remove your car’s door lock online or at the auto parts store.
After you have the lock in your hand, take it to a local locksmith shop and ask them to make you a new key to your ignition using your door lock as a reference.
Keep in mind that in some car’s the ignition switch lock is a bit different from the car’s door lock and it will be necessary for the locksmith to provide you anywhere from two up to ten different keys and only one of them will work on your ignition switch lock even when all of them will work on your car’s door lock.
Here is a list of vehicles that share the same key between the door lock to the ignition switch lock:
Acura and Honda from 1975. You can find the key code stamped on any of the locks such as the door lock, the trunk lock and yes even the glove box lock
Chrysler, Dodge or Jeep remove car door lock cylinder
Ford remove car door lock cylinder
Isuzu remove car door lock cylinder
Kia remove car door lock cylinder
Lexus and Toyota from 2003 and up. 90% of the time you can find the key code stamped on the passenger door lock. Lexus and Toyota door locks are very easy to dissemble by unscrewing one screw using a T25 Torx screwdriver.
Lincoln remove car door lock cylinder
Mazda remove car door lock cylinder
Mercury remove car door lock cylinder
Nissan or Infiniti remove car door lock cylinder
Subaru remove car door lock cylinder
Suzuki remove car door lock cylinder
How much does it cost to rekey a car door lock?
Using a mobile locksmith company to rekey your car door can cost anywhere between $100 to $200. A mobile locksmith company will charge additional fees such as a service call fee to travel to your car’s location.
It will cost less by doing some of the work yourself such as removing the door lock and bringing it into a locksmith shop.
Key stuck in the ignition or car door lock
Ignition lock cylinder failure symptoms
If your key won’t turn in the ignition switch lock or your car door lock, you are not alone. Ignition switch lock and car door lock failure is a very common problem between many vehicles.
Here is an example of part of an ignition switch lock or a car door lock that can cause the lock to stop working:
As you can see in the picture above, this is a standard ignition switch lock with common parts that you can find on many vehicles. The ignition switch lock has parts that help to secure the lock from turning. These parts are called the lock tumbler and they are the parts that are popping out from the top of the ignition switch lock. The two brass colored strips on the side of the ignition lock are holding a part that is called the ignition sidebar.
Both the lock tumbler and ignition sidebar always pop out from the ignition switch lock to prevent the lock from turning.
Only when a key is inside the lock will those parts level up with the rest of the ignition switch lock for a perfectly smooth circular line in order to allow the ignition switch lock to turn.
Lock failure happens when your ignition switch lock or your car door lock has one of these two parts stuck and prevent the lock from turning.
Ignition switch or door lock, how to fix?
Ideally, the better way to fix your door lock or ignition switch lock is by replacing them completely with new locks. You can buy an ignition switch lock or a door lock at aftermarket online stores, auto parts stores, locksmith shops and at dealerships. The cost for those locks can be significantly different. To be a smart shopper it is always a good idea to shop around for those locks online. In many cases you can find differences in pricing between all these places.
Some auto repair shops such as mechanics can change those locks as well.
A convenient option is to use a mobile locksmith company. The locksmith will be able to come to your vehicle’s location which will save you time but in most cases will cost more. They can repair your ignition switch lock or your car door lock right on spot. The locksmith will have additional options to just change a few parts in the lock from actually changing the whole lock itself. That will make it possible for them to repair the lock right on spot. If you’re looking for a locksmith service it is a good idea to call a few companies to get the best price.
GM keys, how to save money:
Programming keys yourself for Buick, Chevy, Cadillac, GMC, Hummer, (only for the years 1998 until 2010).
In most cases you cannot make a GM ignition key from the car door lock, but most GM dealerships will be able to make you a key from the year 1998 until the year 2010 using your car title and your ID. What is great about GM vehicles is that in most cases you will not need to use a professional in order to program your car key even when you have no other keys.
Program GM key: (30 minute process)
Insert your new key into the ignition and turn it to the on position. All the dash lights should come on.
Do not start the engine.
Look for the anti-theft light. (A lock logo or a key logo or just the word theft).
Wait 10 minutes until the anti-theft light turns off.
Turn off the ignition and turn it back on so the anti-theft lights come back on for another 10 minutes but still do not start the engine.
You will need to have the anti-theft light come on a total of 3 times for 10 minutes, for a total of 30 minutes.
When the anti-theft light turns off the third time, turn off the ignition and turn it back on.
Now the anti-theft light should turn off after a few seconds indicating that your new key has been programmed.
Program a key copy for GM: (15 second process)
Insert your old programmed key and turn it to the on position. All the dash lights should come on.
Do not start the engine.
Look for the anti-theft light. (A lock logo, a key logo, or just the word theft).
The anti-theft light should turn off after a few seconds.
Turn off the ignition, remove your old key, and insert the new key.
Turn the ignition to the on position again. (Do not start the engine).
Look for the anti-theft light. (A lock logo, a key logo, or just the word theft).
The anti-theft light should turn off after a few seconds, indicating that your new key has been programed.
These programming instructions are for GM vehicles only and are not valid for other car makes. In fact, most other car makes will need professional programming machines/tools in order to program keys. We suggest using a locksmith or the dealership in order to program a new key. Some other car makes will have the option to program a key copy yourself, but only when you already have two programmed and working keys. For more information on other car makes browse our website.
https://www.denver-locksmith.net/wp-content/uploads/2017/03/Car-door-lock-tumbler.jpg30244032leahchttps://www.denver-locksmith.net/wp-content/uploads/2018/12/We-open-now-24-hr.gifleahc2017-03-01 21:27:142018-09-02 08:31:23Rekey car door lock cost
We Trained Our Technicians To Become Expert Locksmiths.
At Mile high we make it a point to send you the very best locksmith Colorado has available. Each of our locksmiths is a highly trained and expert technician. Each of them is also a salaried staffer who has gone through a full and complete background check before they begin work with our company.