, ,

Schlage VS Kwikset

Door Lock replacement

Can you rekey a Schlage or Kwikset?

Schlage or Kwikset are the most common keyway locks you find today in the U.S.

Can you rekey a Schlage or Kwikset? Yes. To re-key locks means to change the keys that operate the locks. It’s a great thing to do to at a lower cost than changing the lock itself. You can re-key both types of locks, (Schalge or Kwikset), however many times you want. If you think you need to change the keys of your locks more often, for residential property, the Kwikset locks will be a good choice for residential properties. For commercial properties Schlage locks will be the best choice. With the Schlage interchangeable core cylinder, you can easily keep changing your keys without disassembling the lock itself. To re-key the interchangeable core Schlage cylinders you will need to use a locksmith company. It is a very simple process to do. You can change the cores yourself by purchasing a few cores for each lock from the locksmith you use.

Schlage or Kwikset Keys Copied. Schlage or Kwikset are the most common keyway locks you find today in the U.S. You can copy these keys almost anywhere. Any hardware store in your neighborhood will copy this key for you, as well as Home Depot, Lowes, Ace Hardware, and even Walmart.

Schlage VS Kwikset

Design:

  • The Kwikset locks have more shapes, colors, designs, and more choices all around. If you are a contractor or a house owner who is looking for locks to fit the design of your property, we recommend that you start looking at Kwikset locks first. You will have a much larger collection to choose from.

Quality:

  • We will tell you there is no question that Schlage locks are a higher quality from Kwikset locks. This answer tends to be different depending on who you ask… Most of the Schlage locks also cost more. However, Kwikset locks have good quality locks as well. From our experience, if you need to install locks on a residential property you can use the Schlage locks or the Kwikset locks. These locks are great for this purpose, and for residential properties we do not see any difference between these locks. If you need to install locks on a commercial property, we believe you should only use Schlage locks.

Warranty:

  • We have been working as locksmiths for over a decade and can tell you that it is very rare to see a Schlage or Kwikset lock getting rotten or destroyed. On a daily basis, we find locks that have been on a door for over 20 years. We think it’s safe to say these locks, (Schlage or Kwikset), can hold for a lifetime. If you have one of these locks and you want to see if there is a warranty on it, call the lock company to find out.

Re-key Schlage Lock to Kwikset

Basically, you cannot re-key the lock from Schlage to Kwikset, but you can change the lock cylinder from Schlage to Kwikset. A locksmith will be able to do it for you. Changing the lock cylinder will still cost less from changing the lock itself. You can change about 90% of the Schalge lock cylinders from Schlage to Kwikset, and about 10% of the Kwikset lock cylinders are able to be changed at all.

Cheapest way to rekey Schlage or Kwikset locks

Multiple locks with the same key, You might be wondering how you can have multiple locks with the same key. First, you need to know the most common house door lock manufacturers (Schlage or Kwikset) make lock sets with one, two or four locks per package. These packages will come with a key that will work on all the locks. Read more

, , , , ,

Toyota Tacoma key replacement

Toyota push to start

Toyota Tacoma Lock and Key Information

Where can you get a Toyota Tacoma key replacement made if you lost the key? What type of a key does your Toyota Tacoma have? Where can you repair ignition locks and why is your key suddenly stopping to turn the ignition? Mile High Locksmith is an expert locksmith company. We would like to share the answers to these questions for your Toyota Tacoma.

If your Toyota Tacoma truck was made in the years 2011, 2012, 2013, or 2014, then your Toyota Tacoma truck key will need to be one with the letter ‘G’ stamped on the blade.

Toyota Tacoma key replacement

Toyota Tacoma keys have changed much over the years. From the early years when the key was just a simple key, to the later years when the key starts to have features such as an electronic chip hidden in the key head, and in general has become a high security key.
There are a few places that you can have a new replacement key made. You can even buy the key blank yourself online, and have it cut and programmed at your neighborhood Toyota dealership or at a locksmith shop. A few of the websites we recommend are Ebay.com, Amazon.com, and Ikeyless.com. Regardless, if you just need a key copy or have just lost the key and need a new one, before you buy a new key blank or just want to find out the price, you should first find out what kind of a key your Toyota Tacoma requires. Below, we have listed for you Toyota Tacoma keys by the years.

If your Toyota Tacoma was made in the years 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, or 2004, then you have just a regular key, or what we like to call an old fashioned key. These keys are very easy to make. If you just need a key copy, you can have one made in many hardware stores or locksmith shops. If you lost the key, you can have a new key made for you at a Toyota dealership or with an automotive locksmith. If you want to save some money and want to do some of the work yourself, find out how to disassemble the passenger side door lock. On this lock, you will find the key code for your truck. You can take this key code to a locksmith and ask them to make you a new key.
If your Toyota Tacoma was made in the years 2005, 2006, 2007, 2008, 2009, or 2010, then you have a transponder chip key. This key can be a high security key or just a regular key. What they have in common with each other is that they will need to be programmed to your truck. You can have these keys made at a Toyota dealership or through a locksmith. The difference between these two places is that if you lost your key and don’t have a spare one, the locksmith will be able to come right to your truck and make you a key on spot.
If your Toyota Tacoma truck was made in the years 2011, 2012, 2013, or 2014, then your Toyota Tacoma truck key will need to be one with the letter ‘G’ stamped on the blade. These keys will also need to be programmed to your truck.

My key won’t turn the ignition in my Toyota Tacoma truck

If your key won’t turn the ignition, or is even stuck in the ignition, it can be because either your key is worn out or one of the parts inside the ignition lock is stuck. We recommend to first make a new key either by the key code or VIN number and if this doesn’t work, call an automotive locksmith and have them rekey the ignition.

, ,

Park Meadows Mall Locksmith

Park Meadows Mall locksmith

Mile High Locksmith, has been known for many years as the local business and automotive locksmith who provides services at the Park Meadows Mall. We are only a few minutes away. The nature of our business as a locksmith company is to always have someone available to leave right away after you call us. Whether it is an emergency situation or not, we will never charge extra fees. This also applies on the weekends, late hours and on holidays. Mile High Locksmith provides locksmith services at the Park Meadows Mall in Lone Tree, Colorado, 7 days a week from 24 hours.

Car Keys Locked Inside

It is an easy situation to be in. You are busy shopping around at Park Meadows Mall and your mind is on other things. You unlock your vehicle to put all your shopping bags inside, among other things you are doing. You shut the door and realize the doors are locked and now your car keys are locked in your car. It is very easy to lock your keys in your car trunk as well, maybe even more common. If you have locked your keys in your trunk, normally it is easier to unlock the driver’s side door and try to unlock the trunk from there. Some vehicles will need to turn the ignition switch to the on position to enable the trunk lever to work. In some vehicles you can even just open the back seat from the inside. If none of these ways will work for your vehicle, we can always just make you a new car key.

Locksmith Services at Park Meadows Mall

We provide a wide range of locksmith services at Park Meadows Mall which is located at 8401 Park Meadows Center Dr, Lone Tree, CO 80124. We provide the following types of services:

  • Emergency locksmith services
  • Open car doors when keys are locked inside.
  • Making replacement keys on site when car keys are lost.
  • Repairing ignition switches
  • Rekeying locks, repairing, or installing new ones on site.
  • Make key copies
, , , ,

Chrysler Town & Country Key

Key replacement

The Chrysler Town and Country minivan keys have changed over the years. Where and how much it will cost to make a key copy, or to get a replacement key in the case you have lost your key, will depend on the year of your minivan. Mile High Locksmith would like to share some information about some of the common problems Chrysler Town and Country has with it’s locks and keys, how to get a replacement key made, and how to program the key. We will also share with you where you can get a key copy made.

Did you know that if you have lost your key fob remote to your Chrysler and want to get a cheaper version of the key, you can make a Fobic Pod key? This key will replace your key fob remote and will not have push buttons like your key fob remote did.

Chrysler Town and Country key programming

Chrysler Town and Country minivan key fob remotes have an additional security feature. If you lock your vehicle by pushing one of the push buttons and lose the key, then in many cases, you will need to program a new key fob remote with the push buttons, and not just a regular transponder chip key. The reason is, when you press the button to lock the door, you also have locked the programming mode.
However, there is a way to get around it, by programming a Fobik Pod key. The Fobik Pod key will release the programming lock mode and will cost much less from making a new key fob remote.

Chrysler Town and Country key replacement

Chrysler Town and Country keys have changed over the years and below we will share what type of a key your minivan requires by the year.

If your Chrysler Town and Country was made in the years 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, or 2000, then your minivan requires just a regular standard key without any special features. If you have lost the key, a locksmith will be able to make you a new replacement key. If you just need a key copy, many hardware stores will be able to make a copy for you.
If your Chrysler Town and Country was made in the years 2001, 2002, 2003, or 2004, then you have just a regular transponder chip key. If you lost the key or just need a key copy, you can have this key made either by a locksmith company or a Chrysler dealership. We recommend you to shop around between the two.
If your Chrysler Town and Country was made in the years 2005, 2006, or 2007, then you can have two different types of keys. You can have just a regular transponder chip key or a key fob remote. If you lost your key or just need a key copy, a Chrysler dealership or a locksmith can make you a key. For more information about the programming, please read above in the section about key programming.
If your Chrysler Town and Country was made in the years 2008, 2009, 2010, 2011, 2012, or 2013, then you have a Smart key. If you lost this key or just need a duplicate you can have one made through a locksmith or the dealership. The difference between the two will be the type of service. A locksmith will be able to come to your location and make you a working key right then and there, whereas the dealership will ask you to bring your minivan in.

Chrysler Town and Country key stuck in ignition

If your Chrysler Town and Country key gets stuck in the ignition, it can be because of two reasons. The first reason is that the key has changed by overusing it and you can fix this by having a new key made by the VIN number. The second reason is that your ignition switch will need to be repaired by rekeying it.

, , , ,

Toyota 4Runner key

Toyota key replacement
Toyota 4Runner types of keys

If you’ve lost the key to your Toyota 4Runner, the cost of a replacement key and where you can get one made, will depend on the vehicle’s year.

The makers of the Toyota 4Runner have installed simple locks and keys in their vehicles for most of it’s model years. If you just need to make a key copy for one of the older models of a Toyota 4Runner, it can be made in most hardware stores, a locksmith shop, or even at a Toyota dealership. If you have lost your key, you probably can get a new replacement key made at a Toyota dealership or with an automotive locksmith. It’s always best to shop around for prices and services between a locksmith and dealership. Mile High Locksmith™ has been working with Toyota 4Runners for many years and we are very familiar with the locks and keys. Below we have shared some information with you about what you can do if you have lost your key or have ignition and lock problems.

If you have lost your key, you probably can get a new replacement key made at a Toyota dealership or with an automotive locksmith. It’s always best to shop around for prices and services between a locksmith and dealership.

Lost Toyota 4Runner key

If you’ve lost the key to your Toyota 4Runner, the cost of a replacement key and where you can get one made, will depend on the vehicle’s year. We recommend you to shop around between a locksmith company and a Toyota dealership.

Toyota 4Runner types of keys by the years:

  • If your Toyota 4Runner was made in the years 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, or 1997, your key is a simple key and an easy key to make. If you want to save money and do some of the work yourself, you can disassemble the lock on the passenger door side and find the key code stamp. Keep in mind that the key code will be stamped on your Toyota 4Runner door 90% of the time. You can take this key code to a locksmith shop and have them make you a new key.
  • If your Toyota 4Runner was made in the years 1998, 1999, 2000, 2001, or 2002, then your key is a transponder chip key. This key needs to be programmed to your Toyota 4Runner’s immobilizer. Unfortunately, besides programming the key in these years, you will also need to reflash your ECU which requires professional tools and knowledge and is more expensive. A locksmith company or a Toyota dealership will be able to do this for you. We recommend that you shop around for prices. If you have full coverage insurance, some insurance companies might cover part of the cost for you without any deductible or increasing your insurance premium.
  • If your Toyota 4Runner was made in the years 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, or 2011, 2012, 2013, 2014, 2015, 2016 and 2017, then you have a transponder key and the key needs to be cut and programmed to your SUV, which can be done at a Toyota dealership or by a mobile locksmith company. The difference between the two will be the type of service. The dealership will ask you to bring your vehicle in, whereas a mobile locksmith will be able to make you a working key at your location.

Toyota 4runner key stuck in ignition

Basically, there are two common reasons why your Toyota 4Runner key can stop turning the lock, or even get stuck in the lock.

  • First there may be a very small defect in your key. This defect may be so small that the naked eye cannot catch it. The best fix for this problem is to stop using this key. Copying the key will not fix the problem either. You will simply need to ask a locksmith company or Toyota dealership to make a new key by using your Toyota 4Runner’s VIN number or key code.
  • The second most common problem can be that one of the parts inside the ignition cylinder is stuck. The most convenient fix for this is to use a mobile locksmith company. The locksmith will be able to rekey your ignition lock or even change it.
, , , ,

The Hyundai Elantra Keys

Hyundai Replacement Key

Hyundai Elantra key

The Hyundai Elantra has a very simple key to make. If you need a key copy made, some hardware stores will have the key in stock and will also copy the key for you. Another place to get a key copy will be at a Hyundai dealership. You can even buy these keys online and just take it to a hardware store or a locksmith store and have them copy it for you. There isn’t any chip inside these keys and these keys do not need to be programmed to your vehicle. If you have lost the key and have no spare, you can have a new replacement key made by a Hyundai dealership or through an automotive locksmith company. We would like to share some information on Hyundai Elantra keys and ignition problems below.

How much does a locksmith charge to make a replacement key for my Hyundai Elantra? Normally we will charge $100 to make you a replacement key. Prices may vary depending on your location and time of the day.

Hyundai Elantra key won’t turn in ignition
Many times we receive calls from our customers when their key doesn’t turn the ignition, or is even stuck in the ignition. Usually the reason for this to happen, is that the key is worn out or the ignition cylinder parts have gotten stuck. The best fix for this will be to make a new key either by the VIN number or key code. If this doesn’t help, the next way we try to fix the problem is by rekeying the ignition lock.

Hyundai Elantra lost keys

If your Hyundai Elantra was made in the years, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, or 2013 then your key is just a simple key. If your Hyundai Elantra was made in the years 2014, 2015, 2016 or 2017, than you key need to be programmed to your car. An automotive locksmith or a dealership will be able to make a replacement key for you. The difference between the two will be the cost and the type of service. The locksmith company will be able to send their mobile unit right away and make you a new key at your vehicle’s location. The dealership will ask you to come in and get the key from them. We recommend you to shop around for the best price between the two.

Hyundai Elantra keys locked in trunk
If your Hyundai Elantra key get locked in the trunk and you have a trunk lever inside the vehicle, to unlock the door of your car will be the easiest way to get your keys from the trunk. If you do not have a lever for the trunk inside, the mobile locksmith will be able to make you a new key right on spot.

, , ,

Ford Escort Key Locksmith

Ford Escort key blank

The Ford Escort keys have changed over the years. If you have lost your key, there are a few different ways to get a new replacement key. Mile High Locksmith is an expert automotive company and we have been working on Ford Escort keys and locks for many years. We would like to share some information with you in case you have lost your Ford Escort key.

Lost my car key for my Ford Escort what to do?

There are two different ways to have a new key replacement made to your Ford Escort in a case where you have have lost them. The first way, and the most convenient way, will be to call to a mobile locksmith company. For a small fee, the locksmith will come to your Ford Escort’s location and make you a key on spot.
The second way to have a new key replacement made for your car, is to do it yourself. Keep reading below for some specific information we are sharing with you about how to get the key information and make it yourself.

Replacement keys for Ford Escort

Below we will share a list with you on how to find key information for your Ford Escort by the vehicle year.

  • If your Ford Escort was made in the year 1981, then you car will have one key that will open the door and the trunk, as well as start the engine. By disassembling the glove box lock, you can find the key code. You can take this key code to a locksmith shop and have them make you a new key.
  • If your Ford Escort was made in the years 1982,1983, 1984, 1985, 1986, or 1987, then you have one key that opens the doors, trunk and starts the engine. There is no key code on the vehicle locks whatsoever. What we recommend you do is call a locksmith company. The locksmith will have special tools such as tryout keys to be able to make you a new key without disassembling the lock at all.
  • If your Ford Escort was made in the years 1988, 1989, or 1990, then your car will have two separate keys. One key will unlock the doors and start the engine and one key will unlock the trunk and glove box. There is no key information on the locks and the easiest way to make a new replacement key will be to call a locksmith and have them do it for you.
  • If your Ford Escort was made in the years 1991, 1992, 1993, or 1994, then you have one key that will unlock the door and start the engine. There is no key information on the locks and you can should call a locksmith company and have them make a key for you.
  • If your Ford Escort was made in the years 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, or 2003, then you have one key that starts the engine, unlocks the doors and trunk. You can find the key code information stamp on the passenger door lock. You can take this key code to a locksmith shop and have them cut you a new key by the key code.
, , , ,

Lost GMC Envoy key

B102 key blank

For many years the GMC Envoy has had a very simple key to make. In fact, even in the later years, to have a special key with an electronic chip inside was a buyer’s option when the vehicle was purchased. To find out what kind of a key your GMC Envoy requires, you can simply call your GMC dealership or a locksmith company. Just provide them with your vehicle’s VIN number and they can tell you.
The GMC Envoy has a simple ignition switch lock and a simple type of key. The key and the ignition cylinder share common problems that at some point can stop turning the ignition switch. Mile High Locksmith is an expert automotive locksmith company. We have been working on the GMC Envoy SUV for many years and would like to share some information about your GMC Envoy’s locks and keys with you.

Can’t remove GMC Envoy key
If your GMC Envoy key is stuck in your ignition lock, trying to force the key to turn and remove it yourself, can cause more damage. This can become expensive to repair it. If your key is stuck, we recommend you to call an automotive locksmith. The locksmith will be able to send his mobile unit to your SUV’s location and the technician will have special tools to remove the key and do an easy fix to your ignition.

GMC Envoy key replacement

GMC Envoy’s were made between the years 2002 to 2009. Below, we will list the types of keys your GMC has by the different years.

  • If your GMC Envoy was made in the years 2002, 2003, 2004, 2005, and 2006, then your SUV requires just a simple key without any special features. These keys should work on your ignition lock, doors, trunk, and glove box.
  • If your GMC Envoy was made in the years 2007, 2008, or 2009, then you can have two different keys. The first key you may have will be just a regular key without any features. The second type of key you may have is a transponder chip key. This key will need to be programmed to your SUV’s immobilizer. You can easily find out what kind of a key you have by calling to your neighborhood dealership or a locksmith company.
  • Any year of the GMC Envoy keys can be copied very simply. You can buy these keys online or at your neighborhood dealership, or even with a locksmith company. If you buy the key online, one of the hardware stores we recommend you to try to copy the key is at Ace Hardware. If your GMC Envoy key is a transponder chip key, you can program this key yourself as long as you already have two programmed keys. For this information, please read below.

GMC Envoy ignition switch problems

There are a couple of very common reasons why your ignition switch might have problems. These problems can be caused by reasons such as the key won’t turn or the key won’t go into the lock, or the key will not come out of the lock.

  • The first reason that can cause one of these problems is that your key is worn out. Even when the key has a very slight modification, it will be just enough to stop turning the lock, or even get stuck.
  • The second reason that may cause your ignition to have problems is that one of the parts in the ignition cylinder has gotten stuck. The best fix for this problem will be to have your ignition cylinder rekeyed or changed. You can have a mobile locksmith do this for you or at a GMC dealership.

How to program GMC Envoy transponder chip key

How to program a new transponder key yourself:

  • First, you will will need to have a locksmith or GMC dealership cut for you a new transponder chip key by your vehicle VIN number or key code.
  • Insert your newly cut key into the ignition cylinder and turn it to the ON, or RUN position. The theft light on the dash will light up and stay on for about ten minutes.
  • When the theft light goes out, repeat step number two, two more times.
  • When the theft light goes out the third time, the new key has been programmed.

After you are done programming your new key, you can program a second key:

  • Within 20 seconds of completing the last step for the first key, insert a second key you would like programmed, and turn your ignition to the ON, or RUN position. When the light goes out, your new key is programmed.

Program a key copy to your GMC Envoy, (Must have two working keys to be able to program a third key copy)

  • Insert your old working key into the ignition cylinder.
  • Turn the ignition cylinder to the ON position.
  • When the theft light goes out, remove the key.
  • Insert the second old working key and turn the ignition cylinder ON.
  • When the theft light goes out, remove the key.
  • Insert the new key copy you made and turn the ignition cylinder ON.
  • When the theft light goes out, the key has been programmed
, , , ,

Ford Focus ignition problems solutions

Ford key replacement

The Ford Focus has a common problem with the ignition switch that at some point it will turn only half way or stops turning all together. Mile High Locksmith has been repairing ignition switches for many years. Our technicians have gained lots of experience and knowledge on the Ford Focus ignition and how to repair or replace them. We carry all the necessary tools and parts in our services vans to be able to repair your Ford Focus ignition at your location. Please read below some information we have shared about Ford Focus ignition problems.

Where can you fix your stuck Ford Focus ignition?

Ford Focus ignition problems repair

If your Ford Focus was made in the years 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, or 2011, then your Ford Focus requires a standard transponder chip key, or just a regular key. The problem that can make your ignition stop turning is either because your key is worn out, or one of the parts in the ignition cylinder, either the sidebar or one of the wafers, got stuck. In most cases to repair the ignition switch, the technician will need to either disassemble the ignition lock and rekey it, or drill the ignition lock out and replace it with a new one. In a case if your key is worn out, what we recommend you do is get a replacement key cut by either the key code or VIN number.
Ford Focus ignition problems solutions
There are a few places that can repair your ignition cylinder or key. What we recommend you to do is to shop around for prices and services. (Some places will ask you to bring your car in and some places will provide mobile services.)

Where can you fix your stuck Ford Focus ignition?

  • The first place we always recommend you call is the Ford dealership.
  • The second place we recommend you check with is your insurance company. If you have full coverage or roadside assistance service, many insurance companies will cover at least some of the cost without a deductible or increasing your insurance premium.
  • You can check with AAA if you are a member.
  • Call an automotive locksmith company.
, , , ,

Ford Fusion lost key

Ford key fob

Ford Fusion replacement key

Where can I get Ford Fusion keys?

Ford Fusion keys always need to be programed to your car. If you have lost the key or just need a key copy, or are having a problem using the key in your car, there are a few places you can make a new key, repair or program it. Mile High Lock and Key, LLC is an expert automotive locksmith company. Please read below the information we have shared about Ford Fusion keys and locks.

How to program Ford Fusion key?

If your Ford Fusion was made in the years 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 or 2017, then your key has a chip hidden inside and this chip needs to be programed to your car’s immobilizer. In simple words, your Ford Fusion has a security theft system installed in your car. This means that besides your key manually turning your lock, it also has a wireless connection to your car’s computer.
Ford Fusion keys between the years 2006 and 2012 can have just a regular transponder chip key or a key fob remote. The difference between the two is that the transponder chip key has nothing else but the hidden chip inside and the key fob remote has the push button to lock and unlock the doors and trunk. The prices are also different.
Ford Fusion keys from the year 2013 and up, will use an OEM Flip Key. A locksmith or a Ford dealership will be able to cut and program these keys for you.

Where can I get Ford Fusion keys?

If you lost the key to your Ford Fusion, you can have a new key made at a Ford dealership or through an automotive locksmith company. The difference between the two will be the type of service and prices. A locksmith will be able to come to your Ford Fusion’s location and cut and program a new key right on spot. A Ford dealership will ask you to tow your car in.
If you have some time and would like to save some money, you can order these keys online. Then you can bring them to a locksmith shop and have them cut and program the key for you. Some of the websites we recommend to buy the keys from are Amazon.com, Ebay.com and Ikeyless.com.
Ford Fusion key stuck in my ignition
Ford Fusion ignition problems have been a common problem for awhile. At some point the ignition cylinder has failed. What happens, in simple words, is that one of the parts inside the ignition lock becomes stuck which prevents the ignition from turning half way, or just stops turning at all.

The easiest fix for this problem is to disassemble the ignition cylinder and rekey it by simply changing the wafers. A locksmith will be able to provide this service for you.
Ford Fusion key wont start my car
If your key is turning the ignition switch and cranking the engine, but the engine won’t start, this can be caused by a few reasons. Three common reason for this:

Check your battery level. Maybe your battery is low or has died.
It can also be that the chip inside you transponder key has failed. A locksmith will have the machines to check this for you.
The third most common reason why your Ford Fusion key won’t start the car is because your immobilizer has failed. A locksmith will have the right equipment to check this for you as well.